A periodic care of the purchased product will help to keep it efficient and performing over time. After each use, we recommend rinsing with water and drying with a soft cloth to eliminate any residue of products used for body care and avoid the formation of limescale deposits.

CLEANING PRODUCTS Alcohol, liquid soap, neutral detergents or citric acid diluted with water, vinegar and water solution.

TOOLS TO BE USED Soft sponge, cotton or microfiber cloth.

PRODUCTS TO AVOID Detergents containing abrasive substances or based on hydrochloric acid, formic, phosphoric, acetic or hydrofluoric, ammonia, bleach, disinfectants, sponges or abrasive brushes.

AERATORS  The deposits of limestone and impurities in the filters can be removed by removing the aerator and immersing it in diluted vinegar. Leave to soak for a few hours, wash with soap and water, then rinse.

SHOWERS AND SHOWER HEADS In order to avoid the accumulation of limestone inside the shower and/or shower head, it is necessary to carry out a periodic cleaning of the anti-scale silicone rubber nozzles, gently rubbing them.

OUTDOOR SHOWER COLUMNS Always use the flow and pressure limiter supplied inside the product packaging. In case of prolonged periods of non-use (typically: use of the column limited only to the summer season), the shower column must be completely emptied and disassembled keeping it in a dry area.

1. Close the water connection, disconnect the water pipe.
2. Open the handle and drain the remaining water into the tank (about 2 minutes).
3. Unscrew the cap counterclockwise to empty the tank.
4. Clean and store parts of the shower for the following season.

Do not use salt and/or antifreeze liquids in water.